Roll-to-Roll Calender - AWARD

Award

Buyers

Value

£0

Suppliers

Classifications

  • Industrial machinery

Tags

  • award

Submission Deadline

1 year ago

Published

1 week ago

Description

The University of Warwick has a requirement to purchase a new roll-to-roll calender as part of the recently announced UK National Battery Materials Scale-up Facility called Advanced Battery Materials Industrialisation Centre (AMBIC) https://iuk.ktn-uk.org/news/delivering-the-uks-national-battery-materials-scale-up-facility/.
      
      In order to express interest in this opportunity please go to the University of Warwick In-Tend supplier portal (https://in-tendhost.co.uk/universityofwarwick).
      
      The University of Warwick is not a contracting authority for the purposes of the Public Contracts Regulations 2015 (as amended) and its procurement activities are not subject to the Public Contracts Regulations 2015 or the obligations under the European Public Procurement Directives, including the European Remedies Directive. Advertisement of any contract in the Official Journal of the European Union or Contracts Finder is at the sole discretion of the University and is undertaken on a voluntary basis with no implied obligation to comply with the procurement legislation.

Documents

Premium

Bypass the hassle of outdated portals. Get all the information you need right here, right now.

  • Contract Agreement

    The official contract terms, conditions, and scopes of work.

    Download

  • Award Notice

    Details on the tender award and selected suppliers.

    Download

Similar Contracts

Open

NU/2116 - Driving Electrical Revolution (DER) Capital Procurement

Driving the Electric Revolution (DER) is an Innovate UK (IUK) Challenge program to support the UK industry to seize the economic opportunities from the global transition to clean technologies and electrification. The programme will help businesses across numerous sectors including transport, energy, construction and agriculture to invest and work together to capitalise on the UK's strengths in this technology. The DER program vision is 'To make the UK globally recognised as the centre of excellence in PEMD manufacturing processes . As part of that program, Newcastle University was awarded a large grant to establish a new DER Innovation Centre (DER-IC) in the Northeast of England. DER-IC NE will concentrate on the prototyping and scale-up of power electronics and electrical machines. IUK grant is funding the purchase of the systems. This procurement is split into four (4) lots: • Lot 1 - Semi-Automated Die Bonder • Lot 2 - Vacuum Reflow Oven • Lot 3 -.Power Device and Module Tester • Lot 4 - Power Tester The University is not governed by the provisions of the Public Contract Regulations 2015 or the Procurement Act 2023 when carrying out this tender process as it is not a "contracting authority" as defined therein.

Newcastle University

Newcastle University

Published 4 days ago
Open

The provision of Mobile Plant Equipment Hire & Maintenance - Hornsey Street

The Contractor shall provide the following service to the Client for the duration of the service period: The contract term shall be for three (3) years with the option to extend for a further two (2) years. [1 x Volvo L90H] Loading Bucket Tip of lip bucket 4.5m capacity with trash guard RUBBER BLADE 48" - Medium 911M 1" Lock Washers - Medium Blade (qty: 13) PLOUGH BOLT 1 x 4 (qty:13) PLOUGH NUT 1 " (qty: 13) Windscreen Cage Protection to fully protect the operator from debris falling from the bucket whilst maintaining maximum all round visibility. Roll Over Protective Structures (ROPS) & Falling Object Protective Structure (FOPS) sound insulated safety care cab with environmental controls. All Cabs to be fitted with Air Conditioning. Air Pre-Cleaner to deal with dusty environment. Reversing Camera Amber warning beacon, audible reversing warning and standard reversing lights, red seat belts. Guarantee that plant supplied will be able to run on solid TY cushion tyres and without detriment to the plant or operator. Auto-lube on board dispenser for difficult to access greasing points, manual lubrication to ground standing operator greasing points. Automated engine cut off that shall activate with warning if plant is left in idle mode duration for longer than 3 minutes. Additional guarding around hydraulic hoses to minimise risk and wear and tear when in contact with waste. Reduced emissions (compliant with all current and planned legislation regarding emission control) - Euro 6 engines Fire Suppression System Plant Tracking System Load weighing systems to be installed on loading bucket to weigh material being loaded into hoppers or vehicles/containers. Hydraulic isolator switch to ensure complete shut down of plant in an emergency. Additional brush attachment option included required. 1 x Volvo L70 H Loading Bucket Tip of lip bucket 4.5m capacity with trash guard RUBBER BLADE 48" - Medium 911M 1" Lock Washers - Medium Blade (qty: 13) PLOUGH BOLT 1 x 4 (qty:13) PLOUGH NUT 1 " (qty: 13) Windscreen Cage Protection to fully protect the operator from debris falling from the bucket whilst maintaining maximum all round visibility. Roll Over Protective Structures (ROPS) & Falling Object Protective Structure (FOPS) sound insulated safety care cab with environmental controls. All Cabs to be fitted with Air Conditioning Air Pre-Cleaner to deal with dusty environment. Reversing Camera Amber warning beacon, audible reversing warning and standard reversing lights, red seat belts. Automated engine cut off that shall activate with warning if plant is left in idle mode duration for longer than 3 minutes. Additional guarding around hydraulic hoses to minimise risk and wear and tear when in contact with waste. Reduced emissions (compliant with all current and planned legislation regarding emission control) - Euro 6 engines Guarantee that plant supplied will be able to run on solid TY cushion tyres and without detriment to the plant or operator. Auto-lube on board dispenser for difficult to access greasing points, manual lubrication to ground standing operator greasing points. Fire Suppression System Plant Tracking System Load weighing systems to be installed on loading bucket to weigh material being loaded into hoppers or vehicles/containers. Hydraulic isolator switch to ensure complete shut down of plant in an emergency. 1 x JCB 3CX/JCB 4CX/JCB 5CX Amber warning beacon, audible reversing warning and standard reversing lights. Front mounted bucket - 1 piece 50mm wear edge Front solid tyres Fire Suppression System Plant Tracking System Windscreen Cage Protection to fully protect the operator from debris falling from the bucket whilst maintaining maximum all round visibility. Isolator or emergency stop switch to ensure complete shut down of plant in an emergency. Reduced emissions (compliant with all current and planned legislation regarding emission control) - Euro 6 engines Automated engine cut off that shall activate with warning if plant is left in idle mode duration for longer than 3 minutes. All Cabs to be fitted with Air Conditioning Air Pre-Cleaner to deal with dusty environment. Reversing Camera Additional guarding around hydraulic hoses to minimise risk and wear and tear when in contact with waste. All Cabs to be fitted with Air Conditioning. Rear Selector Grab Attachment required for sorting recyclable materials such as metal, wood, mattresses. The Collection Point/Affected Property/Treatment Site The Affected Property operates 7 x days a week. Operating hours are: Mon 07:00am-00:00 Tues-Sat 07:00am-23:30 Sunday 08:00am-17:00 Closed only Christmas Day & New Years Day Frequency of Collection/Service/Testing The Contractor shall provide a fully inclusive repairs and maintenance package within the base price to include collection charges and costs. The Contractor shall guarantee that in the event of plant and equipment failure not caused by the Operator or their agents or in excess of 24 hours, the Contractor shall undertake to supply an equivalent plant at their own cost. In the event that the Contractor is not able to supply a replacement within the agreed timeframe the Company may seek to replace with another hired plant. The contractor shall reimburse the Company the full cost of replacement and shall include any transportation costs incurred as a result of this. All plant and equipment shall hold a minimum of 12-month warranty. The Contractor is to ensure that in the event of any breakdowns (within the company's operating hours) a qualified engineer shall be sent out to site to rectify within 2 hours from notification, to investigate and or remedy the fault and or supply replacement plant. All parts failing due to general and expected wear and tear are to be replaced the Contractor at their cost. The Contractor will produce a list of parts and components which will fall within this category and are exempt within 1 month of the contract commencing. All servicing is to be carried out in accordance with manufacturer's guidance and to the manufacturer's minimum recommended specifications. Copies of all service records and annual inspections will be supplied to the company within 7 working days of all works being completed and retained by the Contractor for a period of 3 years from the expiry of agreement. Upon completion of any and all servicing, maintenance and or repair works the Contractors engineer must supply a signed handover document which states what work has been undertaken and that the plant is now safe, fit for use, fully serviceable and meets all Health & Safety requirements e.g. LOLER or PUWER certification has been issued. Costs for all part, labour and travel through wear and tear are to be included. Solid tyres are to be supplied to begin with as a one of and thereafter will be replaced/repaired by the Company.

Katy Reed

Katy Reed

Published 5 days ago
Open

4463/CYMRU/RH/25 - Vibratory Drilling Spindle

4463/CYMRU/RH/25 - Vibratory Drilling Spindle AMRC Cymru located in Broughton, Flintshire are in the process of creating an aerospace drilling and fastening centre to undertake projects and development activities centred around drilling and fastening capabilities. The next stage in this project requires the purchase of a Vibratory Drilling Spindle to be installed onto our pre-existing rotating turnover drilling jig For compatibility, the new drilling spindle must utilise a Beckhoff control system to run the equipment and subsequently be used to operate the Spindle. The Spindle must be no longer than 700mm in length and 150mm in diameter, the space has already been allocated for the spindle and cannot be amended. The spindle must have vibratory assistance, allowing for varying vibratory effects when drilling the various different materials, helping with chip formation and cutter life extension. In addition, the spindle must also have SuperCritical CO2 capability installed. Allowing further enhancements with cutter trials and developments in enhanced drilling capabilities for aerospace manufacturing and assembly processes Tender Process and Documentation: This procurement is an open procedure conducted in accordance with the Procurement Act 2023. The ITT can be downloaded by registering and expressing your interest on the University`s e-tendering system https://in-tendhost.co.uk/Sheffield If you have any questions or comments in relation to this tender they must be submitted via the In-tend System, this can be accessed at https://in-tendhost.co.uk/Sheffield Completed tenders must be returned through the same e-tendering system. Closing date for receipt of tenders: 14th of April 2025 at 12 noon (UK time).

Katy Reed

Katy Reed

Published 3 weeks ago

AI Bid Assistant

Our AI-powered tool to help you create winning bids is coming soon!

View Contract Source Save Contract

Organisation

The University of Warwick

Jackie Coulson-Savage

[email protected]

024 7657 5095

Timeline complete

Publish
Bid
Evaluate
Award
Complete