ENGINEERING PLANT & INSPECTION SERVICES TERM CONTRACT

Open

Buyers

Value

£200,000

Classifications

  • Technical inspection and testing services

Tags

  • tender

Submission Deadline

1 month from now

Published

19 hours ago

Description

Engineering Inspections

Documents

Premium

Bypass the hassle of outdated portals. Get all the information you need right here, right now.

  • Contract Agreement

    The official contract terms, conditions, and scopes of work.

    Download

  • Award Notice

    Details on the tender award and selected suppliers.

    Download

Similar Contracts

Open

Periodic Electrical Inspection & Testing to Domestic Properties

The works to be provided under this contract will consist of Electrical Inspection and Testing of the 'fixed' electrical parts of electrical installations within NIHE's Domestic properties, to be checked (periodically inspected and tested) by a qualified and competent person within a 5-year planned cycle. The electrical installations must meet the required standards, as per BS7671, the Requirements for Electrical Installations, set out within the IET Wiring Regulations Eighteenth Edition, as amended. The contractors will record any non-compliances with BS7671, as amended and use observation classification codes, C1, C2, C3 and FI to indicate where remedial work and or further investigation must be undertaken. If observations are made with the electrical installation, requiring classification codes C1, C2 and FI, then remedial work will be required, these remedial works should be undertaken by the Contractor during the completion of the inspection and testing. Upon completion of the remedial works relating to observations classified as C1, C2 and FI, the Contractor must issue a Satisfactory Electrical Installation Condition Report (EICR). The work also incorporates the replacement of Smoke and Heat detectors which have already achieved or will achieve a 10-year life within the next 1 year. Core Works which is Periodic Electrical Inspection and Testing including other Works, but not limited to, Electrical Installation Works, Fire Detection Alarm test and replacement Fire Detector's, and Consultancy services associated with this contract when required. All electrical work is to be undertaken by an organisation that is a registered user/subscriber to an accepted electrical licence to practice system. All electrical workers engaged in the delivery of the service must be registered with and hold a valid Licence to Practice (LtP), issued by an approved electrical Licence to Practice system as set out by the Department of Finance. LtP systems which are currently recognised as providers under the LtP initiative are SparkSafe and ECS Check Northern Ireland (provided by the Electrotechnical Certification Scheme). All electrical work is to be undertaken by an organisation that is registered, operates, and maintains a UKAS accredited third party electrical certification system. Government-approved registering bodies in Northern Ireland are NICEIC (National Inspection Council for Electrical Installation Contracting) and NAPIT (National Association of Professional Inspectors and Testers. All information contained within this notice is indicative only and subject to change at any time without notice. Full details of the Conditions of Participation and Scope will be detailed in the Associated Tender Documents. The contract is focused on Domestic properties only. Periodic Electrical Inspection & Testing to non-domestic properties will be subject to a separate procurement. Note, the lot values and total contact values (both with and without VAT) have been rounded up to the nearest 100. Precise values relating to the pre-tender estimate for each lot will be provided in the ITT.

Katy Reed

Katy Reed

Published 2 weeks ago
Open

Materials Testing Framework for STEP - UKIFS

UKIFS STEP programme (Spherical Tokamak for Energy Production) seeks to establish a materials testing framework as follows: 1.Magnets materials testing – mechanical/ thermal, electrical, and REBCO tests under cryogenic conditions at a range of temperatures down to 20 K, for magnet materials (HTS tapes, metals, insulators (composites), solders), and mock-up samples of magnets and structures where applicable. 2.Vacuum Vessel & In-Vessel Systems (VIVS) manufacturing testing – mechanical, thermophysical and bespoke materials testing required to build a reliable material property database for increasing confidence in the system design into four key technologies: breeder blankets, divertors, plasma facing components and shields. Two previous Requests for Information for this requirements were published with the following notices: https://www.find-tender.service.gov.uk/Notice/000564-2025 https://www.find-tender.service.gov.uk/Notice/002310-2025 We are looking for suppliers who can provide a range of services (one of more tests) to join the framework that will be in operation over the next 6 years (2 years + 2 years + 2 years). Tender publication is planned for 24th June. As part of the tender, bidders will be invited to attend a webinar explaining framework format and framework management principles. To view this notice, please click here: https://www.delta-esourcing.com/delta/viewNotice.html?noticeId=954979795

Katy Reed

Katy Reed

Published 1 month ago
Open

Electrical and Biomedical Engineering Framework Agreement

This is a Regionalised Framework Agreement across the South East with a focus on SME's and local Trusts to be able to provide the service. It is designed to offer an efficient mechanism for procuring innovative and reliable Equipment maintenance solutions that directly support the delivery of exceptional patient care. This includes preventive, corrective, and technical support services to ensure that all equipment remains compliant with relevant safety, regulatory, and performance standards This Framework Agreement is designed to be able to meet the needs of regional health and local public sector Authorities, and will include Suppliers with capability across the local geographical landscape. The FWA is planned to be divided into the following lots – Lot 1: Equipment Maintenance Lot 2: Equipment Repair Lot 3: Equipment Management Lot 4: Safety Audits Lot 5: Training Lot 6: Quality Management Lot 7: Document Control Lot 8: Bespoke: A combination of all or any of the above lots, including any value added/innovative service.

Katy Reed

Katy Reed

Published 1 month ago

AI Bid Assistant

Our AI-powered tool to help you create winning bids is coming soon!

View Contract Source Save Contract

Organisation

Midlothian Council

Regional or local authority

Steven Carvel

[email protected]

+44 1312707500

Timeline active

Publish
Bid
Evaluate
Award
Complete