Public Sector Construction And Building Tenders

he University of Sheffield wishes to invite tenders for a Construction Design and Management (CDM) Principal Contractor Consultancy Resource for COMPASS on behalf of the Advanced Manufacturing Research Centre, Castings Group at Catcliffe, South Yorkshire. The AMRC has recently won HICOMS funding for an 'automated, large scale composites manufacturing centre', to create large scale composite components, to support global composite manufacturing companies and end users. The finished and equipped facility will be known as 'COMPASS' (Composites at Speed and Scale) and the address is:- The University of Sheffield AMRC Factory 2050-Mark III Europa Avenue Sheffield S9 1ZA This facility will house a significant amount of high value equipment including:- • High Volume Deposition Cell - including robots, guide rails etc. • 24,000kN Hydraulic Press • Large Composites Curing Oven and Oven Feed-In Table • Consolidation Station • Resin Injection System • Heating Units • Chilled Water Cooling System • Robot Machining Cell We have sourced and placed orders for the above equipment and all suppliers have been informed that they will be expected to work under guidance and instruction of the University's nominated lead contractors (under CDM regulations/requirements). The University of Sheffield/AMRC is looking to engage with a consultant or organisation specialising in CDM/Health and Safety provisions and centred around carrying out certain roles and responsibilities of a 'Principal Contractor' and specifically the installation and commissioning of high value equipment within a hi-tech research and development, manufacturing facility. It is envisaged that the contract will be completed by 31st December 2025 (with a long stop completion date of 31st March 2026). The keys to the facility are expected to be formally signed off and handed over to the AMRC in January 2025. A broad timeline for the engagement of a CDM contractor is envisaged to be as follows:- • 1st October 2024 - 31st December 2024 - Onsite in Sheffield and ramping up activity (approximately 14 - 21 hours per week). • 1st January 2025 - 30th September 2025 - Onsite in Sheffield and working a full working week (35 hours) • 1st October 2025 - 31st December 2025 - Onsite in Sheffield and ramping down activity (approximately 21-14 hours per week). Therefore, the programme of work is expected to be 12-15 (potentially up to 18) months. Tender Process and Documentation: This procurement is an open procedure. The ITT can be downloaded by registering and expressing your interest on the University`s e-tendering system https://in-tendhost.co.uk/Sheffield If you have any questions or comments in relation to this tender they must be submitted via the In-tend System, this can be accessed at https://in-tendhost.co.uk/Sheffield Completed tenders must be returned through the same e-tendering system. Closing date for receipt of tenders: Friday 4th October 2024 at 12 noon (UK time). Additional information: https://www.in-tendhost.co.uk/sheffield/

After public consultation it was decided to provide new outdoor exercise equipment with the Recreation Ground adjacent to the new Recreation Centre. The new facility will cater for a range of exercise equipment which will be for community use and will be run by a local volunteer management committee, whilst being overseen by Chacewater Parish Council. The equipment has to be suitable for outdoor continuous use, so needs to be vandal and water proof. The contract will provide wet pour surfacing around the equipment and areas in the documentation, along with safety fencing. The details of how to apply are in the Invitation to tender document .

Contract for Construction of a balancing pond and associated works Ref: WF2024/091 Wyre Forest District Council ("the Council") wishes to appoint a Contractor for the completion of a Flood Alleviation Pond at Sycamore Drive, Wythall. The appointment will be by way of competitive Tender via the Open procedure based on the Requirements and Specification set within the tender documents. The tender exercise is being carried out via e-procurement portal, ProContract-DueNorth. To gain access to the tender documentation, please visit the below website. Tenderers will need to submit an expression of interest and an electronic copy of the Invitation to Tender will be sent as an attachment. Any tender queries must be sent via ProContract Due-North's messaging functionality. - ProContract Due-North address: https://procontract.due-north.com/Login - Tender submission deadline: 11am Monday 30th September 2024 If you have any problems gaining access to ProContract Due-North, please contact their customer support at https://www.proactis.com/uk/support/

This opportunity had previously been advertised and closed 2 September 2024; the only change is an increase in the budget from £140,000 to £150.000. Sellectronics was established in 2008. We manufacture printed circuit board assemblies for a wide range of applications. Our core sectors cover industrial, medical, aerospace and oil and gas. We wish to have built a new mezzanine floor built at our premises. The purchase of this system is part of a grant funded application process and therefore procurement will be subject to grant approval of the project. We will assess tenders received on a Most Economically Advantageous Tender.

NOTE: This notice was updated on 30 August 2024 for the following reason: Amended title to make the opportunity clearer.(On behalf of the Board of Trustees of the Tate Gallery, we are looking to appoint a suitably qualified Construction Project Manager and Contract Administrator to support the redevelopment of the Palais de Danse in St Ives Cornwall. Constructed on the site of an old naval school, the Palais de Danse is one of the most unique spaces in the heart of St Ives. Formerly a cinema and dance hall, the Palais was also an important hub for community events during the Second World War and beyond. The building was bought by Barbara Hepworth in 1961 to use as her second studio. This gave her the space to create larger and more complex sculptures, including the monumental Single Form (1961-4) commissioned for the United Nations in New York. Located directly opposite Trewyn Studio - now the Barbara Hepworth Museum and Sculpture Garden - the Palais was gifted to Tate by the Hepworth Estate in 2015 and was awarded Grade II listed status in 2020. Together, these buildings housed the entire scope of Hepworth's creative work from 1949-1975. The Palais de Danse is both deeply rooted in community memory and central to Hepworth's artistic legacy worldwide. Having remained untouched since Hepworth's death in 1975, Tate St Ives is now embarking on a major capital project to renovate this significant building with Adam Khan Architects. The changes will introduce substantive improvement to the fabric of the building to support visitor access across all levels of the building, facilities and a visitor welcome, and expand the story around Hepworth's artistic legacy, the importance of the PDD for the community, and the potential for contemporary making and artistic practice, supported by a new artist residency. The project will uncover the Palais's rich history, realise its immense potential for the community and continue its story by securing the building for the long term. A design team has been appointed and we have an indicative design which responds to Tate's brief. The team are currently in Stage 3 and preparing for formal planning submission and our delivery phase of the NHLF application, following a successful first round of funding in 2023. We anticipate opening the Palais to the public in Q3 2026 with main construction completed in Q2 of the same year.) Additional information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.