Decarbonisation – Royal Armouries Boiler Replacement

Open

Buyers

Katy Reed

Value

£900,000

Classifications

District heating
Long-distance heating
Water heaters and heating for buildings; plumbing equipment
Heating equipment
Central-heating equipment
Heat-exchange units, air-conditioning and refrigerating equipment, and filtering machinery
Heat pumps
District heating boiler
Water tanks
Central-heating radiators and boilers and parts
District-heating mains construction work
Heating works
Heating plant construction work
District-heating plant construction work
Heating-plant repair and maintenance work
Roof works and other special trade construction works
Special trade construction works other than roof works
Electrical installation work
Electrical wiring and fitting work
Electrical installation work of heating and other electrical building-equipment
Other electrical installation work
Insulation work
Heating, ventilation and air-conditioning installation work
Central-heating installation work
Boiler installation work
Repair and maintenance services of central heating
Commissioning of heating installations
Installation services of electrical and mechanical equipment
Architectural, construction, engineering and inspection services
Architectural and related services
Engineering services
Consultative engineering and construction services
Engineering design services
Miscellaneous engineering services
Mechanical and electrical engineering services
Integrated engineering services
Engineering-related scientific and technical services

Tags

tender

Submission Deadline

1 month from now

Published

4 hours ago

Description

The aim of the project is to replace the existing boilers at the Royal Armouries Museum in Leeds with a more carbon-efficient technology that does not utilise natural gas or any other fossil fuels. While the tender primarily seeks an electric solution, such as Air Source Heat Pumps (ASHP) or Ground Source Heat Pumps (GSHP), other technologies or approaches are also welcome for consideration.
For more information about this opportunity, please visit the Delta eSourcing portal at: 
https://neupc.delta-esourcing.com/tenders/UK-UK-Leeds:-District-heating./SPK53DZ42D
To respond to this opportunity, please click here: 
https://neupc.delta-esourcing.com/respond/SPK53DZ42D

Documents

Premium

Bypass the hassle of outdated portals. Get all the information you need right here, right now.

Contract Agreement

The official contract terms, conditions, and scopes of work.

Download
Award Notice

Details on the tender award and selected suppliers.

Download

Similar Contracts

Open

YORbuild Major Works 2

A Framework Agreement to serve all public sector bodies (and their statutory successors) and third sector organisations in the Yorkshire and Humber region, Nottinghamshire, Derbyshire, areas of Leicestershire and North East of England and Lincolnshire (UKE, UKC, UKF3, UKF1, UKF21 and UKF22). The works involved are principally general building works, including contractors design when required. In addition some civil engineering works may also be included.

Published 3 hours ago

Open

DPS1 1332 - Tree Work

Haringey Council DPS1 1332

London Borough of Haringey

Published 5 hours ago

Open

Replacement heating and mechanical plant

The works involved in this project consist of the replacement of the heating plant and general replacement of mechanical plant within the plant room. The heating plant consists of 3no. condensing units serving 3no. hyrdroboxes, a domestic hot water cylinder and pipes, pumps and ancillaries, protective cages, controls, insulation, valves, sensors etc. The final installation shall provide for good access to provide easy maintenance and potential to remove and replace all plant. Plant should not be installed in locations where access is restricted or difficult. Allow to include for all the BMS, electrical and builders work associated with the mechanical services contract and detailed in this specification and as shown on the drawings. Electrical works are detailed within the this specification. Installed and commissioned to latest issues of relevant British Standards, Water Regulations and Gas Safety Regulations. The contractor shall develop the construction phase drawings in electronic (dwg) format using the current architectural layout. As-built drawings shall be provided to the client as part of the O&M information upon completion of the project. The contractor is responsible for providing the following content or documentation as part of the project construction: 1. Develop the Stage 4 Tender Design into a fully co-ordinated Stage 5 Construction Documentation package 2. Check the provision for and accuracy of the builder's work information issued prior to the award of the contract 3. Detail the final or supplementary builders work information based on manufacturers or sub-contractors design orco-ordination information and provide fully dimensioned drawings. 4. Detail all access requirements, including access in false ceilings, for maintenance & cleaning and provide fullydimensioned and annotated drawings. 5. Design and undertake all acoustic and fire stopping required to facilitate the works 6. Ensure adequate pipework fall gradients are provided. 7. Ensure suitable access to all valve and plant locations for easy access of maintenance personnel. 8. Prepare detailed electrical wiring diagrams of all equipment supplied showing all interconnections between equipment to enable all wiring installations to be undertaken. 9. Ensure sizes indicated on the detailed design information are not invalidated by the selection of alternative routes during co-ordination or selection of alternative manufacturer's equipment. 10. Ensure all alternative proposals including value engineering exercises are fully designed before submitting forapproval. 11. Note and advise the main contractor of all acoustic and fire stopping required to facilitate the works. 12. Any changes to the detailed design drawings and information required as part of a variation or change from specification post contract award shall be undertaken by the contractor and information issued to the CA for approval/comment. 13. Design, supply and install all rectangular builders work openings with both dimensions less than or equal to 200mmand all round builders work openings with a diameter of less than or equal to 200mm.

Published 7 hours ago

AI Bid Assistant

Our AI-powered tool to help you create winning bids is coming soon!

View Contract Source Save Contract

Organisation

Katy Reed

Public authority - sub-central government

Procurement Department

[email protected]

1132201946

Timeline active

Publish

Bid

Evaluate

Award

Complete