CR4 Process Vessels - AWARD

Complete

Buyers

Value

£0

Classifications

  • Laboratory, optical and precision equipments (excl. glasses)

Tags

  • awardUpdate

Submission Deadline

1 year ago

Published

4 months ago

Description

You are invited to submit a tender for the following requirements; the design and construction of bespoke clean in place Process vessels capable of communicating with other systems as part of an integrated manufacturing processes.

Similar Contracts

Open

Automated Liquid Handlers

UK Biobank requires a supplier with the necessary capacity and capability to supply, deliver, install, and commission automated liquid handlers. UK Biobank requires the Supplier to provide the System and be responsible for the design, implementation, testing, commissioning, training and service support. Detail of the requirements for the goods and services are set out within the Specification. UK Biobank is responsible for the safe preservation and scientific exploitation of over 17 million Samples (plasma, serum, buffy coat, extracted DNA, urine and saliva) that are accessible for approved use by academic and industry researchers. About 11 million Samples are stored at -80°C across an Automated Storage System and other manual Freezers at UK Biobank's headquarters in Stockport, Greater Manchester. The remaining 6 million Samples are stored in vapour phase Liquid Nitrogen Tanks at a Backup Site in the South of England. UK Biobank undertakes the supply of Samples for different sizes of research projects: - from handfuls to ~5,000 Cherry Picked Samples for piloting or case-control studies (where Samples are likely picked from across the whole collection); - projects involving ~50,000 Samples (with some degree of Cherry Picking); - longitudinal sets of Samples for the same Participants over several time-points; and/or - retrieval of whole cohort sets (~500,000 Samples, with a higher density of Samples clustered together). UK Biobank's next phase of strategic development will be characterised by increasing demand for access to Samples and several new large-scale Sample collections. UK Biobank, therefore, requires new Systems with sufficient capacity, flexibility, and resilience to support the next 10 years of work as set out in this Specification. The System should deliver capacity to Reformat Samples to send to researchers to conduct assays and provide capability to process Vacutainers. Consequently, UK Biobank has prepared a Specification for a Solution to meet the increased throughput demands that the new site must support foreseeable operational requirements and potential future developments, including but not limited to; - Increase in Sample supply to external laboratories at least four-fold (1 million Samples per year); Reformatting. - Extensive new Sample collections from UK Biobank Participants (and potentially their relatives) at multiple future time-points; Vacutainer Processing. - Prospective creation of whole cohort Destination Samples (for projects) whilst a Stock Sample is thawed for processing, split the remaining Sample across multiple storage Tubes; Reformatting. - Likely change to alternative Labware for new Sample collections and selective reformatting of existing Samples coincident with their next freeze-thaw cycle or en-masse; Reformatting. The System will be required to support UK Biobank laboratory operations when they move to a New Site at the Manchester Science Park in the City of Manchester in the North West of England, UK. Practical completion of the New Site is planned for July 2026 (with early access to the laboratory area from May 2026 for installation of the Solution). The move to Manchester Science Park will be accompanied by new Automated Storage Systems and new LIMS. The following work will be ongoing throughout 2026, in anticipation of an early 2027 opening to the New Site; - Transfer 11 million Samples from the existing facility - Install and commission new equipment and move and validate existing equipment - Implement a new LIMS The laboratory has been designed to accommodate Liquid Handling Systems in the Reformatting Lab (to support equipment to meet the mandatory throughput described in Sections 2.2.2 and 2.2.3). There is expansion space in the North of the ground floor that could be used for the optional expansion throughput described in Section 2.2.4. As part of this procurement, some award questions are mandatory and will be scored on pass/fail basis, and others have with weighted scoring, as detailed in Volume 1 of the tender documents. The estimated contract value for the purchase of the Liquid Handlers and the provision of services as set out in this Contract Notice and for the duration described may be in the range of £1.2m - £3.2m GBP. We do not anticipate the cost to deliver the Solution without expansion to exceed £1.8m. UK Biobank reserves the right to discontinue or delay the procurement process and may decide not to award a contract as a result of this call for competition. UK Biobank shall not be liable for any costs or expenses incurred by any organisation in considering and/or responding to the procurement process. Tenders and supporting documents must be priced in pounds sterling and all payments made under the contract will be in pounds sterling, unless otherwise advised. UK Biobank will incorporate a standstill period at the point the decision in relation to the award of the contracts is notified to bidders. The standstill period, which will be a minimum of ten (10) calendar days, provides time for unsuccessful bidders to lodge an appeal in regards to the award decisions, before the contracts are entered into. Tenderers are advised to allow adequate time for uploading documents and to dispatch the electronic response well in advance of the closing time to avoid any last minute problems NOTE: To register your interest in this notice and obtain any additional information please visit the myTenders Web Site at https://www.mytenders.co.uk/Search/Search_Switch.aspx?ID=233323. A user guide is available at https://www.mytenders.co.uk/sitehelp/help_guides.aspx.

Katy Reed

Katy Reed

Published 2 days ago
Open

ID 6219059 - AFBI - RIVER MONITORING EQUIPMENT

The Agri-Food and Biosciences Institute (AFBI) has a requirement for the supply, delivery, installation and commissioning of river monitoring equipment to support the Catchments Research Unit within its Agri-Environment Branch. AFBI require the provision of up to a maximum of : 8 x hydrostatic level sensors, 3 x phosphorus analyser systems, 3 x nitrate sensors and controllers, 3 x sample tanks and pumping infrastructure, 4 x YSI Exo2 multiparameter sondes and 8 x data capture and a completely integrated data logging and telemetry system connecting to a secure cloud-based storage facility. All instruments must be supplied and delivered to the buyers site no later than 31 March 2026, installation of the equipment will take place at a later date. Suppliers should refer to the Specification Schedule for full detail on the requirements of this contract.

Katy Reed

Katy Reed

Published 2 days ago
Open

SU72(26) Re-tender for a Portable Ultrasound Machine with Specialised Phased Array Cardiac, Linear and Non-imaging Probes

This re-tender procurement process is to source a suitable supplier of high-end portable Ultrasound Machine with specialised phased array cardiac, linear and non-imaging probes. The original Specification from tender SU05(26) which was advertised but not awarded in September/October 2025, has been overhauled to better address the challenges of its practical use in the intended physical environments, as well as its extended scope of data analysis, to better meet the needs of the research. The role of this equipment is to satisfy the high-quality clinical research imaging to be acquired in remote locations with underserved populations. Dr Drane has laid foundations to explore how rapid urbanisation contributes to rising rates of cardiometabolic disease worldwide and in order to understand the earliest mechanisms of pathophysiology and disease, the scope of the research needs to include people whose lifestyles remain largely unaffected by urbanisation. Since the remote locations of such communities often exclude them from institutional research, a fully portable, high-end ultrasound machine is needed to enable inclusive, community-based research. The successful supplier must be able to deliver their equipment to the Health and Wellbeing Academy, Glyndwr building on the University’s Singleton Park Campus (map and full address provided within tender documents). External funding has been granted from the Higher Education Research Council (HERC) for a fixed maximum budget of GBP 44,900 excluding VAT (this equipment is VAT exempt due to its medical research usage) which includes all delivery and service contract costs. The HERC funding stipulates a delivery deadline of 31st March 2026, so we would like to achieve delivery with appropriate training and SOPs provided to all users, as soon as is practically possible. This tender is being conducted electronically via etenderwales BravoSolution (project 32109, itt 121866), therefore only tenders submitted via that portal by the tender deadline, can be considered.

Katy Reed

Katy Reed

Published 3 days ago

AI Bid Assistant

Our AI-powered tool to help you create winning bids is coming soon!

View Contract Source Save Contract

Organisation

CPI (Centre for Process Innovation)

Procurement Department

[email protected]

+44 01740625716

Timeline complete