Regulation 61 Notice - Monitoring Programme Plan Analysis

Open

Buyers

Katy Reed

Value

£3,999,997

Classifications

Technical testing, analysis and consultancy services
Laboratory services
Environmental monitoring other than for construction
Chemicals and oil pollution investigation services
Surface water pollution monitoring or control services

Tags

tender

Submission Deadline

1 month from now

Published

6 days ago

Description

The aim of this Procurement is to secure a Contract for 12 months for the testing of MAG's trade effluent and surface water to ensure compliance with regulation 61. Further details can be found within the Invitation to Tender documents.

Documents

Premium

Bypass the hassle of outdated portals. Get all the information you need right here, right now.

Contract Agreement

The official contract terms, conditions, and scopes of work.

Download
Award Notice

Details on the tender award and selected suppliers.

Download

Similar Contracts

Open

Municipal Building: Design element for the cultural and creative transformation works to the Passmore Edwards Building, Falmouth

The Council invites response to this Invitation to Tender (ITT) from suitably qualified suppliers ("Suppliers") for the provision of a professional services design team for design services to overhaul the Passmore Edwards Municipal Building. It should be noted that work consist of the following: a) Internal works to redesign the internal gallery space (see brief). Initially this is to undertake RIBA Stages 0-2 which will inform a submission for funding. If approved, there will be a second phase RIBA 3-4. The final stage RIBA Stages 5-6 will also be dependent on external funding applications. b) The external works are at RIBA Stage 3 and have both Listed Building Consent and planning permission. c) With the above exception for the external works, where the appointed professional services design team will be required to undertake RIBA stages 3 onwards, for all other aspects of the work they will be required to provide the professional services to undertake all the relevant tasks through the RIBA stages, including surveys, technical studies, business planning and the design of a practical and economically viable solutions through to contract administration.

Published 6 hours ago

Open

Trialling Benthic eDNA Sampling Methods for Monitoring Marine Biodiversity

JNCC is undertaking an offshore survey to collect data to assist in monitoring the effectiveness of proposed fisheries management measures covering 42 English Marine Protected Areas (MPAs) including North-West of Jones Bank (NWJB) Marine Conservation Zone (MCZ). This survey is being utilised as an opportunity to investigate the effectiveness of various benthic environmental DNA (eDNA) sampling techniques for monitoring marine biodiversity, and to assess the performance of each method relative to the others to inform future monitoring methodology. JNCC wishes to commission a contract to undertake an analysis of marine taxa eDNA present in sediment and water samples to be collected at the seafloor on the TC25035 survey of North-West of Jones Bank MCZ. JNCC plan to trial three benthic eDNA collection methods within the survey area. 3. Project Background The RV Tom Crean will depart from Cork for the TC25035 survey on 9 September 2025 and return on 25 September 2025. Seventeen days of sampling will be carried out as part of the survey, focusing on data collection to support the assessment of potential fisheries management measures. The survey will gather data on the effects of reduced fishing pressure on the recovery of subtidal mud habitats, as well as of sea-pen and burrowing megafauna communities. North-West of Jones Bank MCZ is situated approximately 165 km offshore from the South-West of England. The site covers 399.14 km2 of continental shelf, and it contributes one of the largest areas of subtidal mud to the MPA network of all designated MCZs. For more information regarding NWJB MCZ please see https://jncc.gov.uk/our-work/north-west-of-jones-bank-mpa/. DNA and eDNA are increasingly utilised, cost-effective tools for monitoring biodiversity. Traces of DNA (e.g. from scales, faeces, skin, blood) left in the environment (e.g. water and sediments), called environmental DNA, are left behind by all organisms. Using molecular methods, such as eDNA metabarcoding, we can detect an organism's presence in the environment without directly observing it. eDNA techniques can provide high-resolution pictures of biodiversity from micro to macro scales and inform on assemblage composition and biological processes at reduced costs and time. Niskin bottles, metaprobes and sediment samples have been increasingly used in recent years to collect DNA from inshore marine waters, complementing existing traditional survey methods. However, application of these methods in offshore waters has been more limited. 4. Project Objectives As part of the offshore survey to North-West of Jones Bank MCZ, the primary research and development objective will be to trial three eDNA sampling techniques to fill significant knowledge gaps on the use of eDNA in offshore environments. To achieve this objective, the following research questions to be answered are: 1. Which benthic eDNA sampling methods are recommended for sampling offshore marine organisms based on the following factors? a. Quantity of DNA collected b. Quality of DNA collected 2. How do the following parameters compare among the benthic eDNA sampling methods? a. Species detected b. Species of conservation interest detected c. Species richness To answer these questions, JNCC plan to collect four eDNA samples using each of the three methods below, at four stations within the survey area. This will result in up to 48 eDNA samples plus six controls. eDNA source eDNA collection method Storage Sampling methods Water Sterivex filter 99% ethanol (volume tbc) Niskin bottles attached to a CTD from a depth 3 metres above the seafloor Water including sediment particles Gauze 50ml 99% ethanol Metaprobes attached to a towed camera sledge for 30 mins Sediment Sediment sample Frozen Sediment samples collected from a Day grab JNCC wishes to commission a contract to undertake this analysis of marine taxa eDNA in water and sediment samples collected on the TC25035 survey of NWJB. JNCC plan to collect a total of 54 samples. However, please note that the resulting sample number will depend on successful sampling delivery, which could be affected by factors such as weather. JNCC would like to use primers to test samples for the presence of marine vertebrates, fishes, invertebrates, meiofauna and bacteria. The successful contractor will undertake the analysis as set out below (Section 5) adhering to common standards. 5. Project Objectives: Detailed Tasks The tenderers should provide a quote broken down into the following elements: • Transport of 54 samples (48 eDNA samples plus six controls) from Cork, Ireland to the laboratory • Sample preparation and DNA extraction of 54 samples (48 eDNA samples plus six controls) • The per-sample analysis of: o 16 x niskin bottle eDNA samples plus two controls o 16 x metaprobe eDNA samples plus two controls o 16 x sediment eDNA samples plus two controls Using universal primers to target a full range of marine biodiversity such as: o Bacteria and archaea (e.g. marker 16S rRNA) o Meiofauna invertebrates (e.g. marker 18SSSU) o Invertebrates (e.g. marker CO1LB) o Fish (e.g. marker 12STele) o Vertebrates (e.g. marker 16SMV3) • Delivery of a final report, to include: o Introduction and aims o Methods o Results o Discussion o Recommendations for future offshore monitoring The methods section of the report should share sufficient detail for the study to be repeated. It should cover: • Clear field protocol detailing eDNA sampling and storage for method comparison and validation. • DNA extraction methods - including the names of kits if used. State how the DNA was quantified and discuss the quality of DNA extracted. • PCR amplification - specify the primers, PCR cycle conditions and reagents used. • Sequencing - detail how the DNA products were prepared for sequencing including reagents, primers and conditions. State how the DNA was quantified, and the model of the sequencing machine used. In addition, the methods should allow the reader to understand the confidence in the sequences obtained. • Bio-informatic processing: State in detail how the bio-informatic processing was completed, by specifying the steps taken. State any programs that were used. • State any reference libraries used, and if a custom database was created the rules used. • Where sequences are being used for taxonomic assignment, please explain the methods used to assign a species and why any reads may have been discarded. The results and discussion sections of the report should include the following: • The efficiency of DNA extraction and correct amplification of expected PCR products at each stage. • A discussion of any problems and how they were resolved, such as issues with PCR leading to a change of reagents or amplification conditions. • A detailed discussion explaining the results and confidence levels of the bioinformatic processing. • Detailed results, including statistical analysis of data, to address Questions 1 and 2 above. • To answer Question 2b, the results should include tables on species of interest, detected using each method. The list (to be provided by JNCC) includes UK BAP Priority Species, OSPAR Threatened and/or Declining Species, Annex II species, Species listed as Features of Conservation Interest (FOCI), and invasive non-native species. Tenderers are invited to provide a description of how these requirements will be met. Please ensure you provide a quote per sample. Please also include details of internal quality assurance processes to ensure quality is assured in the project outputs. For example, this could include inclusion of negative control DNA extraction samples, quantification and purity checks to assess DNA yield and quality, and review of the project report by multiple experts. 6. Outputs Any products or outputs submitted to JNCC should adhere to JNCC's house-style and should be produced in an accessible format (see product specification for more information). Output / Deliverable Format Spreadsheet listing the species identified (Latin and common names) the fragment of DNA extracted as part of the study identified as that species, and the reference library and sequence ID used to identify the species MS Excel spreadsheet (.xlsx) (proforma to be provided by JNCC) All raw sequence data generated FASTQ format Final report MS Word document (.docx) and Adobe PDF (.pdf) 7. Product Specification JNCC is committed to making its publicly available resources and documents accessible, in accordance with the Public Sector Bodies (Websites and Mobile Applications) (No. 2) Accessibility Regulations 2018. Making material accessible means making sure it can be used by as many people as possible. This includes those with:  impaired vision  motor difficulties  cognitive impairments or learning disabilities  deafness or impaired hearing The outputs and material that JNCC publishes should be compliant with the Web Content Accessibility Guidelines version 2.1 AA standard. To meet this standard, all reports and other documentation which are to be made publicly available must adhere to JNCC's house-style (to be provided) and be produced using a JNCC template (to be provided), unless otherwise stated. All reports (draft and final) should be provided electronically via email both as a Microsoft Word document and an Adobe PDF. Copies of documentation associated with case studies should be provided in electronic format with an associated reference catalogue. For any other outputs or products which are to be made publicly available through JNCC, evidence regarding how the accessibility standard will be reached should be included.

Published 8 hours ago

Open

Materials Testing Framework for STEP

UKIFS STEP programme seeks to establish a materials testing framework to enable timely and efficient testing of magnet and Vacuum vessel and in-vessel systems (ViVS) materials over the next eight years. The purpose of this procurement is to pre-qualify a number of market-leading specialist test providers who will be called upon to fulfil the requirements for testing as and when these requirements (“call-off contracts”) arise. UKIFS will enter into Framework Agreement contract with these suppliers, which will be used as an overarching contract putting in place a compliant mechanism to order specific tests. To view this notice, please click here: https://www.delta-esourcing.com/delta/viewNotice.html?noticeId=972875447

Published 11 hours ago

AI Bid Assistant

Our AI-powered tool to help you create winning bids is coming soon!

View Contract Source Save Contract

Organisation

Katy Reed

Public authority - sub-central government

[email protected]

Timeline active

Publish

Bid

Evaluate

Award

Complete