CP2528-24 Maintenance and Improvement of Public Rights of Way Framework 2025 - 2029

Open

Value

£10,000,000

Classifications

  • Agricultural, forestry, horticultural, aquacultural and apicultural services

Tags

  • tender

Submission Deadline

2 weeks from now

Published

11 hours ago

Description

This Framework Agreement is to provide maintenance and improvement works and technical support for approximately 5 000 km of Public Rights of Way (comprising footpaths, bridleways, restricted byways and byways), 230 km of off-road recreational trail network (for example, the Tarka Trail) and 590 km of minor road network (mainly unmetalled) including the South West Coast Path National Trial for which it is responsible along with the areas covered by the Stover Country Park and Grand Western Canal Country Park or other land requiring works.   The framework agreement will operate over a 4-year period commencing 1st April 2025 and expiring on 31st March 2029 (with a break clause at the Authority's discretion to close the arrangement at the end of year 2)


The Framework Agreement may also be used by local partners such as  Dartmoor and Exmoor National Park Authorities, and parish and town councils to maintain some or all of the public rights of way within their respective boundaries under an Agency 

DCC wishes to appoint a multiple of appropriately skilled and competent contractors to the framework agreement who can be called upon to undertake the maintenance and improvement works up to an approximate value of £100,000 per scheme and technical support for discrete activities to an estimated value of upto £10,000.  
Some of these works may be undertaken by landowners, volunteers and/or DCC staff therefore contractors appointed to the arrangement do not have exclusivity in undertaking such works.
The framework will cover eight geographical sub areas throughout the administrative area of the Authority (based on District Council Boundaries as shown in Schedule 1) and comprises  lots as follows:

Lot 1: Work Activities which will include Vegetation Clearance and Typical Maintenance and Improvement Activities (Service Group A).  and Work Activities involving the use of Chainsaw Equipment including Tree Works (up to 380 mm diameter and ground based works only) (Service Group B).

Lot 2: Work Activities which will include more extensive works such as path surfacing, drainage and bridge installation, involving the use of heavier machinery and equipment (Service Groups C and D)

Lot 3: Work Activities requiring technical expertise such as path inspections (planned and reactive), applying for permits and permissions (e.g., planning consent, and environmental permits), and assessing proposals for and drafting of path orders.

The historic annual spend for this type of work has been approximately GBP 1.5 million with  historic average value of individual works orders being approximately £2,700.

Additional information: 
The procurement documents are available for unrestricted and full direct access, free of
charge, at
https://www.supplyingthesouthwest.org.uk
Additional information can be obtained from the above-mentioned address
Tenders or requests to participate must be submitted electronically via
https://www.supplyingthesouthwest.org.uk

Documents

Premium

Bypass the hassle of outdated portals. Get all the information you need right here, right now.

  • Contract Agreement

    The official contract terms, conditions, and scopes of work.

    Download
  • Award Notice

    Details on the tender award and selected suppliers.

    Download

Similar Contracts

Open

Flail collector/ Hi-tip Mower

The Castle Eden Dene NNR team has a requirement for a small heavy duty contractor flail collector for use on its suite of reserves, to help with the effective management of grassland restoration projects on grassland SSSI. Ideally the mower will be suitable for use with a compact tractor and have the option of wheels to support the unit whilst cutting. Note: there is a requirement for the machine to be able to cut vegetation at a height of around 300mm, hence the need for supporting wheels (the mower will only be operated at 300mm when used for cutting the seedheads of invasive tall grasses or when topping thistles), this is to avoid damaging the sensitive herb layer. The mower will primarily be used for sensitive grassland works in the summer months to control invasives, however in the winter we will require it to remove gorse and other woody stems, as well as general grass cutting where grazing intervention is not possible. Wheels or similar are desirable, to allow for elevated cutting and supporting the machine when cutting on uneven ground (to prevent bouncing). Note both wheel design and weight of machine may also be taken into consideration when awarding the contract as the grasslands are sensitive and rutting of sensitive grassland needs to be kept to a minimum. The required minimum specification for the machinery is as follows: • Front feeder plate - assists with intake of tall material. • Wheeled height adjustable - to enable a cutting height of around 300mm. • Hi-tip ability for loading material into trailers. • Safeguards to reducing the risk of damaging the machine from hitting unknown and unseen obstacles. • Suitable cutting heads for work detailed above. • Gearbox with overrun clutch to avoid damage to gearbox or tractor. • Three-point linkage mounted. • HD rotor bearings to withstand shock loads to the rotor in tough environments. • HD Side Skids to help follow the ground and reduce damage to the machine • Appropriate documentation would be expected with all kit, as well as a good level of warranty period. Options for servicing packages would also be required. Additionally: information you will need to detail/ supply will include: • Min Tractor HP required to operate • Machine weight • Minimum lift needed to operate • Cutting width • Carrying capacity of cut material To apply for this opportunity you must submit your quotation meeting the requirements detailed in the Request for Quotation (RFQ) attached. Your response must be sent to [email protected] by 5pm on 10/01/2025. If you have any clarification questions linked to this opportunity or the procurement process please submit these via email to [email protected]. Please note that, unless commercially sensitive, both the question and the response will be circulated to all tenderers.

Natural England

Published 1 week ago
Open

CP2528-24 Maintenance and Improvement of Public Rights of Way Framework 2025 - 2029

This Framework Agreement is to provide maintenance and improvement works and technical support for approximately 5 000 km of Public Rights of Way (comprising footpaths, bridleways, restricted byways and byways), 230 km of off-road recreational trail network (for example, the Tarka Trail) and 590 km of minor road network (mainly unmetalled) including the South West Coast Path National Trial for which it is responsible along with the areas covered by the Stover Country Park and Grand Western Canal Country Park or other land requiring works. The framework agreement will operate over a 4-year period commencing 1st April 2025 and expiring on 31st March 2029 (with a break clause at the Authority's discretion to close the arrangement at the end of year 2) The Framework Agreement may also be used by local partners such as Dartmoor and Exmoor National Park Authorities, and parish and town councils to maintain some or all of the public rights of way within their respective boundaries under an Agency DCC wishes to appoint a multiple of appropriately skilled and competent contractors to the framework agreement who can be called upon to undertake the maintenance and improvement works up to an approximate value of £100,000 per scheme and technical support for discrete activities to an estimated value of upto £10,000. Some of these works may be undertaken by landowners, volunteers and/or DCC staff therefore contractors appointed to the arrangement do not have exclusivity in undertaking such works. The framework will cover eight geographical sub areas throughout the administrative area of the Authority (based on District Council Boundaries as shown in Schedule 1) and comprises lots as follows: Lot 1: Work Activities which will include Vegetation Clearance and Typical Maintenance and Improvement Activities (Service Group A). and Work Activities involving the use of Chainsaw Equipment including Tree Works (up to 380 mm diameter and ground based works only) (Service Group B). Lot 2: Work Activities which will include more extensive works such as path surfacing, drainage and bridge installation, involving the use of heavier machinery and equipment (Service Groups C and D) Lot 3: Work Activities requiring technical expertise such as path inspections (planned and reactive), applying for permits and permissions (e.g., planning consent, and environmental permits), and assessing proposals for and drafting of path orders. The historic annual spend for this type of work has been approximately GBP 1.5 million with historic average value of individual works orders being approximately £2,700. Additional information: The procurement documents are available for unrestricted and full direct access, free of charge, at https://www.supplyingthesouthwest.org.uk Additional information can be obtained from the above-mentioned address Tenders or requests to participate must be submitted electronically via https://www.supplyingthesouthwest.org.uk

AI Bid Assistant

Our AI-powered tool to help you create winning bids is coming soon!

View Contract Source Save Contract

Timeline active

Publish
Bid
Evaluate
Award
Complete