Tender for the Supply and Installation of a Cryomagnetic System for NMR Applications

Open

Value

£1,120,000

Classifications

  • Instruments for measuring quantities
  • Measuring instruments

Tags

  • tender

Submission Deadline

1 year from now

Published

2 weeks ago

Description

The University of Birmingham invites tenders for supply and installation of a cryomagnetic system that is suitable for NMR experiments. The cryomagnetic system will form part of the Ultra-Low-Temperature NMR, i.e. facilities created with the support of an EPSRC Strategic Infrastructure award. It will be used to facilitate/support fundamental and applied science research using NMR by researchers from chemistry, physics and materials science across the UK. In this context, the system will be used to provide a wide range of sample environment including RF access to the samples at very low temperature as well as in a strong, homogenous and stable magnetic field. Therefore, it will be required as part of the project to supply modular probes that are readily modified to suit the purposes of different requirements for the sample environment. The broad user base and diverse range of materials to be characterised with the equipment means that the equipment interface should be user friendly and reliable.
The cryomagnetic system should provide a sample environment on a single platform, especially being capable of sweeping the magnetic field and temperature simultaneously and continuously. It should consist of a 'Superconducting Magnet' with a maximum field strength of 16 T or higher and two cryostats that collectively provide a sample temperature range between 20 mK and 300 K or wider. Each of the cryostats should operate in a different temperature range with some overlap, e.g., i) Variable Temperature Insert (VTI) operates at temperatures between 1.5 K and 300 K or wider and ii) Dilution Refrigerator (DR) operates for temperatures between 20 mK and 2 K or wider. Specifically, the parts of the cryomagnetic system should further satisfy the following requirements:
•	Spatial field homogeneity around the maximum field position better than 10 ppm over 1cm3 diameter sphere volume (DSV).
•	Temporal field stability around the maximum field position better than 10 ppm / hour.
•	Maximum field ramp rate should be 1 T/min or faster.
•	Liquid helium consumption when fitted with VTI should be less than 400 cc / hour under static conditions with a magnet in a persistent mode.
•	Accessible sample space when using VTI should be 30 mm in diameter or larger.
•	The sample space for VTI should be filled with helium gas when in operation.
•	Accessible sample space when using DR should be 30 mm in diameter or larger.
•	The sample space for DR should be filled with liquid helium mixture when in operation. 
The cryostat options as well as probe options should be easily exchangeable and integrated with the magnet, with the entire system having a single PC-based controller capable of executing automated system setting and data collection. The instrument should connect directly with the University of Birmingham's helium liquefier system. It should be delivered, installed, and tested on site with a maintenance and service package, with provision of on-site training.

Documents

Premium

Bypass the hassle of outdated portals. Get all the information you need right here, right now.

  • Contract Agreement

    The official contract terms, conditions, and scopes of work.

    Download
  • Award Notice

    Details on the tender award and selected suppliers.

    Download

Similar Contracts

Open

Tender for the Supply and Installation of a Cryomagnetic System for NMR Applications

The University of Birmingham invites tenders for supply and installation of a cryomagnetic system that is suitable for NMR experiments. The cryomagnetic system will form part of the Ultra-Low-Temperature NMR, i.e. facilities created with the support of an EPSRC Strategic Infrastructure award. It will be used to facilitate/support fundamental and applied science research using NMR by researchers from chemistry, physics and materials science across the UK. In this context, the system will be used to provide a wide range of sample environment including RF access to the samples at very low temperature as well as in a strong, homogenous and stable magnetic field. Therefore, it will be required as part of the project to supply modular probes that are readily modified to suit the purposes of different requirements for the sample environment. The broad user base and diverse range of materials to be characterised with the equipment means that the equipment interface should be user friendly and reliable. The cryomagnetic system should provide a sample environment on a single platform, especially being capable of sweeping the magnetic field and temperature simultaneously and continuously. It should consist of a 'Superconducting Magnet' with a maximum field strength of 16 T or higher and two cryostats that collectively provide a sample temperature range between 20 mK and 300 K or wider. Each of the cryostats should operate in a different temperature range with some overlap, e.g., i) Variable Temperature Insert (VTI) operates at temperatures between 1.5 K and 300 K or wider and ii) Dilution Refrigerator (DR) operates for temperatures between 20 mK and 2 K or wider. Specifically, the parts of the cryomagnetic system should further satisfy the following requirements: • Spatial field homogeneity around the maximum field position better than 10 ppm over 1cm3 diameter sphere volume (DSV). • Temporal field stability around the maximum field position better than 10 ppm / hour. • Maximum field ramp rate should be 1 T/min or faster. • Liquid helium consumption when fitted with VTI should be less than 400 cc / hour under static conditions with a magnet in a persistent mode. • Accessible sample space when using VTI should be 30 mm in diameter or larger. • The sample space for VTI should be filled with helium gas when in operation. • Accessible sample space when using DR should be 30 mm in diameter or larger. • The sample space for DR should be filled with liquid helium mixture when in operation. The cryostat options as well as probe options should be easily exchangeable and integrated with the magnet, with the entire system having a single PC-based controller capable of executing automated system setting and data collection. The instrument should connect directly with the University of Birmingham's helium liquefier system. It should be delivered, installed, and tested on site with a maintenance and service package, with provision of on-site training.

Open

Tender for The Supply and Install of A Cryomagnetic System For Low Temperature Physics Experiments

The University of Birmingham invites tenders for supply and installation of a liquid helium ("wet") cryostat fitted with high-field magnet - a cryomagnetic system - suitable for low-temperature physics experiments. The cryomagnetic system will form part of a research lab being established via a UKRI Future Leaders Fellowship funding award, for measuring high-field transport and magnetic properties of quantum materials at low temperatures. The cryomagnet is intended to accommodate a variety of probes and inserts, sourced separately, to allow a wide range of sample environment including access to very low temperature as well as a strong, homogenous and stable magnetic field. Funding stipulates that the system will be open to users outside the group, so the equipment interface should be user friendly, and should interface with existing computer code used in the group. The cryomagnetic system should house a superconducting magnet assembly with a maximum field strength of at least 16 T (with reversible polarity). The magnet must be able to be switched in and out of persistent-current or driven modes of operation in the standard manner for physics laboratory cryomagnets. Suitable current sources, cryogenic liquid monitors and temperature monitoring should also be included, with easy-to-use computer interfaces to allow MATLAB code to query all these values and send commands to control all aspects of the magnet, including magnetic field ramps. The instrument should connect directly with the University of Birmingham's helium liquefier system. It should be delivered, installed, and tested on site with a maintenance and service package, with provision of on-site training.

Open

SC13207/24

The University of Birmingham invites tenders for supply and installation of a liquid helium ("wet") cryostat fitted with high-field magnet - a cryomagnetic system - suitable for low-temperature physics experiments. The cryomagnetic system will form part of a research lab being established via a UKRI Future Leaders Fellowship funding award, for measuring high-field transport and magnetic properties of quantum materials at low temperatures. The cryomagnet is intended to accommodate a variety of probes and inserts, sourced separately, to allow a wide range of sample environment including access to very low temperature as well as a strong, homogenous and stable magnetic field. Funding stipulates that the system will be open to users outside the group, so the equipment interface should be user friendly, and should interface with existing computer code used in the group. The cryomagnetic system should house a superconducting magnet assembly with a maximum field strength of at least 16 T (with reversible polarity). The magnet must be able to be switched in and out of persistent-current or driven modes of operation in the standard manner for physics laboratory cryomagnets. Suitable current sources, cryogenic liquid monitors and temperature monitoring should also be included, with easy-to-use computer interfaces to allow MATLAB code to query all these values and send commands to control all aspects of the magnet, including magnetic field ramps. The instrument should connect directly with the University of Birmingham's helium liquefier system. It should be delivered, installed, and tested on site with a maintenance and service package, with provision of on-site training. To apply please register via the e-tendering portal https://in-tendhost.co.uk/universityofbirmingham/aspx/Home

AI Bid Assistant

Our AI-powered tool to help you create winning bids is coming soon!

View Contract Source Save Contract

Timeline active

Publish
Bid
Evaluate
Award
Complete