C8090 Framework for the Supply and Installation of Timber and Metal Fencing and Gates

Award

Value

£768,000

Suppliers

Classifications

  • Erection of fencing

Tags

  • award

Submission Deadline

2 years ago

Published

6 months ago

Description

C8090 Framework for the Supply and Installation of Timber and Metal Fencing and Gates.

Description:South Tyneside Council and South Tyneside Homes wish to establish a framework agreement 
fencing and gates as well as adhoc metal fabrication requirements.
The works will be on an as and when required basis.
Lot 1 - Supply and installation of  Timber fencing and
gates.   
Lot 2 - Supply and installation of Metal fencing, gates and
fabrications.
This framework is available for use by South Tyneside Homes, South
Tyneside Council and any other body wholly owned or controlled by the Council,
together with South Tyneside NHS Foundation Trust, South Tyneside Housing
Ventures Trust Ltd  and any member of NEPO - follow link for list of
included bodies (http://www.nepoportal.org)'


NEPO Ref DN615232
Please see link :-
https://procontract.due-north.com/ProjectManagement/ProjectDashboard?projectId=db1ff79c-27e0-ec11-8115-005056b64545

Documents

Premium

Bypass the hassle of outdated portals. Get all the information you need right here, right now.

  • Contract Agreement

    The official contract terms, conditions, and scopes of work.

    Download
  • Award Notice

    Details on the tender award and selected suppliers.

    Download

Similar Contracts

Open

Hog Cliff NNR Glebe Farm Deer fencing

The specification and site location details are also set out in the attached Maps. Approximately 962 metres of deer fence, 2 x 12ft deer field gates, 4 x deer pedestrian gates as per specifications below. General Deer Fencing Specification in line with Forestry Commission guidance found at: https://cdn.forestresearch.gov.uk/2006/03/fctg002.pdf Parsons Close field fence to exclude Sika, Fallow, Roe and Muntjac. Fence height - 1800mm Maximum mesh size - 80mm x 80mm up to 1500mm of fence height Intermediate Stakes - chestnut, 2.6m x 8-10cm Strainers/turning posts - chestnut, 3m x 15-18cm Maximum stake spacing - 5 metres Tensioned top and bottom support wires to prevent mesh from sagging. Gate hanging and slamming posts chestnut square or round, minimum dimensions: 3m x 18cm minimum. Not to be used as strainers. 2 x Field Gates must exclude all deer species above and be constructed from treated softwood timber. Height 1800mm and be minimum 3660mm wide. Can be single gate or pair, but pair must be secured in the centre (e.g. by drop bolts). Must be able to be secured with padlock. 4 x Pedestrian gates must be self-closing, with a lockable latch and open within kissing gate enclosure. Constructed from treated softwood timber, 1800mm high and minimum 900mm wide. Some light scrub removal and/or topping will be required along fence line (to be confirmed with NE staff after contract awarded). Additional information: To apply for this opportunity you must submit your quotation meeting the requirements detailed in the Request for Quotation (RFQ) attached. Your response must be sent to [email protected] 5pm on 04/10/24. If you have any clarification questions linked to this opportunity or the procurement process please submit these via email to [email protected] or [email protected]. Please note that, unless commercially sensitive, both the question and the response will be circulated to all tenderers.

Natural England

Published 1 week ago
Open

Hog Cliff NNR Glebe Farm Deer fencing

Approximately 962 metres of deer fence, 2 x 12ft deer field gates, 4 x deer pedestrian gates as per specifications below. General Deer Fencing Specification in line with Forestry Commission guidance found at: https://cdn.forestresearch.gov.uk/2006/03/fctg002.pdf Parsons Close field fence to exclude Sika, Fallow, Roe and Muntjac. Fence height - 1800mm Maximum mesh size - 80mm x 80mm up to 1500mm of fence height Intermediate Stakes - chestnut, 2.6m x 8-10cm Strainers/turning posts - chestnut, 2.8m x 15-18cm Maximum stake spacing - 10 metres Tensioned top and bottom support wires to prevent mesh from sagging. Gate hanging and slamming posts chestnut square or round, minimum dimensions: 2.8m x 15cm. Not to be used as strainers. 2 x Field Gates must exclude all deer species above and be constructed from treated softwood timber. Height 1800mm and be minimum 3660mm wide. Can be single gate or pair, but pair must be secured in the centre (e.g. by drop bolts). Must be able to be secured with padlock. 4 x Pedestrian gates must be self-closing, with a lockable latch and open within kissing gate enclosure. Constructed from treated softwood timber, 1800mm high and minimum 900mm wide. Some light scrub removal and/or topping will be required along fence line (to be confirmed with NE staff after contract awarded). Additional information: To apply for this opportunity you must submit your quotation meeting the requirements detailed in the Request for Quotation (RFQ) attached. Your response must be sent to [email protected] 5pm on 04/10/24. If you have any clarification questions linked to this opportunity or the procurement process please submit these via email to [email protected] or [email protected]. Please note that, unless commercially sensitive, both the question and the response will be circulated to all tenderers.

Natural England

Published 2 weeks ago

AI Bid Assistant

Our AI-powered tool to help you create winning bids is coming soon!

View Contract Source Save Contract

Timeline complete

Publish
Bid
Evaluate
Award
Complete